ButtonWorx™ Membrane Repair Pad

Repair worn out, hard to press buttons on your Ademco alarm panel.
Membrane keypad installs between the original keypad and circuit board, replacing the electrical contacts with new carbon material that works just like the old rubber keypad but will never wear out, ooze oil or collect dirt. 
ButtonWorx™ is an additional part. It does not replace any original parts or provide a new rubber keypad. 

This membrane keypad was designed to fit the Ademco 6128, 6150, 6160 and many others. 

There are a lot of models and not all have been tested for fit. If your keypad looks similar (with the 12 button number pad, with or without an additional row of 4 equally spaced buttons on the right or left side) then this button pad should work. However, the product has only been tested to fit in the models listed. There may be slight spacing changes or additional components or plastic posts etc.. that would require additional cutouts or design changes. 

If you want to try this out on a model that isn't listed and it does not fit your Ademco alarm panel I will (your choice) refund your order or make the design changes needed to send you a replacement. All you need to do is send me a quality scan (or photo) of your keypad circuit board with a ruler against one edge so I can see what needs to be done.   

Known to fit: 6127, 6128, 6150, 6160

Part A is the 12 button number pad section
part B is a break away 4-button that can be used on models that have 4 additional buttons